Teleste Luminato Multireceiver input module Δείτε το σε μεγένθυση

Teleste Luminato Multireceiver input module

Teleste Luminato quad multi-standard receiver enables flexible selection of free-to-air and scrambled services via DVB-S, DVB-S2, DVB-S2X, DVB-T, DVB-T2, DVB-C, ISDB-T, ITU-T J.83 A/B/C and IP interfaces. Services can be adjusted to match the operators service line-up with built-in advanced transport stream processing capabilities.

Multiple services per receiver high efficiency, lower investments
Two physical ports with dual receivers: Several possible input configurations
Descrambling on all of the inputs
IP inputs for encrypted or free-to-air content
Embedded security services cant be accessed in unprotected format
Hot swap as standard swap the module and keep the configurations
DVB-S2X reception for efficient high bitrate satellite video
Advanced transport stream processing
Demultiplexing from MPTS to SPTS
PID remapping and filtering
PSI/SI pass-through or regeneration
Service follow up, service ID remapping, stream type filtering, SID follow up and service information
Automatic/manual PSI-SI table generation
Support for numerous CAS
Multicast and unicast streaming
MPTS passthrough
All input alternatives are enabled with software and available without additional software keys/licenses
High service availability with input stream redundancy
Emergency video streaming

Περισσότερες λεπτομέρειες

TLS-LM-MRQ

ΝΕΟ

Ρωτήστε για τιμή

Περισσότερες πληροφορίες

Parameter Specification 
Satellite Receiver RF input
Impedance 75 ohm
Frequency Range 950 2150 MHz
AFC range 8 MHz
Constellation QPSK, 8PSK, 16APSK, 32APSK
FEC modes (auto-detected) All ratios compliant with EN302307
Spectral Inversion Automatic
Signal levels -70 -25 dBm
Symbol rate 1,567,5 MS/s
Transport Stream Bitrates per input up to 145 Mb/s
Adjustable LNB voltage off/13/18 V
Max output current per connector 500 mA 
22 kHz tone on/off
DiSEqC v 1.1
Standard EN300421
EN302307-1/ BlueBook A83-1
EN302307-2/ BlueBook A83-2 DVB-S
DVB-S2
DVB-S2X
Terrestrial Receiver RF input
Impedance 75 ohm
Frequency Range 47 862 MHz
Constellation QPSK, 16QAM, 64QAM
256QAM
DQPSK DVB-T/T2/ISDB
DVB-T2
ISDB-T
FEC modes (auto-detected) All ratios compliant with standards
Adjustable voltage off/13
Max output current per connector 500 mA 
OFDM spectrum 2k, 8k
2k, 4k, 8k
1k, 2k, 4k, 8k, 16k, 32k DVB-T
ISDB-T
DVB-T2
Segments Full (13seg) ISDB-T
Signal levels -90 -20 dBm
Channel Bandwidth 6, 7, 8 MHz
Transport Stream Bitrates per RF input According to standards
Standard EN300744
EN302755 V1.4.1
Nordig Unified ver 2.2.1
ABNT NBR 15601
DVB-T
DVB-T2

ISDB-T

Cable Receiver RF input
Impedance 75 ohm
Frequency Range 110 862 MHz
Constellation 16QAM, 32QAM, 64QAM, 128QAM, 256QAM
FEC modes (auto-detected) All ratios compliant with standard
Levels -65-32 dBm
Channel Bandwidth 6, 7, 8 MHz
Symbol rate 47.2 MS/s
Standard ITU-T J.83 Annex A ,B and C
EN 300 429
Nordig Unified ver 2.2.1
IP Input
Packet format UDP/IP 17 TS packets per frame
Traffic type unicast or multicast
Input streams per module 2
Dejittering buffersize 120ms
Maximum bitrate per input stream 192 Mb/s
Bitrate format CBR & VBR
IP Streaming
Packet format 17 or RTP DVB transport packets over UDP/IP
Traffic type unicast or multicast
Maximum IP streamers per module 120
Maximum streaming capacity per module 400 Mb/s
500 Mb/s DVB scrambling
AES scrambling
Traffic shaping max peak traffic limiter
DVB Common Interface Descrambling
Connector PCMCIA dual slots
Standard DVB_CI EN50221
CA module PC-Card type II Hot Plug
TS bitrate up to 192 Mbit/s
DVB CSA and AES Content Protection
Max services to be scrambled per module 120
DC Feed
Adjustable voltage off/13/18 V 
Max output current per connector 500 mA 
General
Supply voltages 24 V
Power consumption 14 W 
Connectors RF F female
Dimensions 20 x 109 x 253 mm h x w x d
Weight 0,3 kg
Enclosure classification IP21
Operating temperature range -10...+55 °C
Storage temperature range -30...+70 °C
Specification is met 0+45 °C

Γράψτε μια κριτική

Teleste Luminato Multireceiver input module

Teleste Luminato Multireceiver input module

Teleste Luminato quad multi-standard receiver enables flexible selection of free-to-air and scrambled services via DVB-S, DVB-S2, DVB-S2X, DVB-T, DVB-T2, DVB-C, ISDB-T, ITU-T J.83 A/B/C and IP interfaces. Services can be adjusted to match the operators service line-up with built-in advanced transport stream processing capabilities.

Multiple services per receiver high efficiency, lower investments
Two physical ports with dual receivers: Several possible input configurations
Descrambling on all of the inputs
IP inputs for encrypted or free-to-air content
Embedded security services cant be accessed in unprotected format
Hot swap as standard swap the module and keep the configurations
DVB-S2X reception for efficient high bitrate satellite video
Advanced transport stream processing
Demultiplexing from MPTS to SPTS
PID remapping and filtering
PSI/SI pass-through or regeneration
Service follow up, service ID remapping, stream type filtering, SID follow up and service information
Automatic/manual PSI-SI table generation
Support for numerous CAS
Multicast and unicast streaming
MPTS passthrough
All input alternatives are enabled with software and available without additional software keys/licenses
High service availability with input stream redundancy
Emergency video streaming

ΚΑΤΑΣΚΕΥΑΣΤΕΣ