Cisco Aironet 2702I ( int. antenna) Indoor 802.11ac High Density Access Point (3x4 MIMO) - Ceiling Mount Δείτε το σε μεγένθυση

Cisco Aironet 2702I ( int. antenna) Indoor 802.11ac High Density Access Point (3x4 MIMO) - Ceiling Mount

Cross-AP noise reduction Optimized AP roaming Cisco ClientLink 3.0 technology Cisco CleanAir technology MIMO equalization Cross-AP noise reduction Cross-AP noise reduction, a Cisco innovation enables APs to intelligently collaborate in real time about RF conditions so that users connect with optimized signal quality and performance. Optimized AP roaming Optimized AP roaming ensures that client devices associate with the AP in their coverage range that offers the fastest data rate available. Cisco ClientLink 3.0 technology Cisco ClientLink 3.0 technology improves downlink performance to all mobile devices, including one-, two-, and three-spatial-stream devices on 802.11ac. At the same time, the technology improves battery life on mobile devices. Cisco CleanAir technology Cisco CleanAir technology enhanced with 80 MHz channel support. CleanAir delivers proactive, high-speed spectrum intelligence across 20-, 40-, and 80-MHz-wide channels to combat performance problems due to wireless interference. MIMO equalization MIMO equalization capabilities, which optimize uplink performance and reliability by reducing the impact of signal fade. Cisco Aironet 2702i Controller-based - Radio access point - 802.11a/b/g/n/ac - Dual Band

Περισσότερες λεπτομέρειες

CS-AIR-CAP2702I-E-K9

ΝΕΟ

Συχνότητα Dual Band
Διαθεσιμότητα 3-5 Εργάσιμες Ημέρες

€ 1.029,30 χωρίς Φ.Π.Α.


€ 1.276,33με Φ.Π.Α.

Περισσότερες πληροφορίες


Manufacturer's Part Number
AIR-CAP2702I-E-K9
EAN
0882658622366
Product Description
Cisco Aironet 2702i Controller-based - radio access point
Device Type
Radio access point
Weight
1 kg
Dimensions (WxDxH)
22.1 cm x 22.1 cm x 5.1 cm
Manufacturer Warranty
Limited lifetime warranty
RAM
512 MB
Form Factor
External
Data Link Protocol
IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac
Flash Memory
64 MB
Frequency Band
2.4 GHz, 5 GHz
Power Over Ethernet (PoE) Supported
PoE
Model
Cisco Aironet 2702i Controller-based

Environmental Parameters

Min Operating Temperature
0 °C
Max Operating Temperature
40 °C
Humidity Range Operating
10 - 90% (non-condensing)

Miscellaneous

Compliant Standards
VCCI, ICES-003, EN 300.328, FCC Part 15.247, RSS-210, RSS-102, UL 2043, UL 60950-1, IEC 60950-1, EN 60950-1, FCC Part 15.107, FCC Part 15.109, EN 300.489.1, EN 301.893, FCC Part 15.407, EN 60601-1-2, ARIB STD-T66, ARIB STD-T71, EN50155, CAN/CSA C22.2 No. 60950-1, EMI

Networking

Form Factor
External
Connectivity Technology
Wireless
Data Transfer Rate
450 Mbps
Line Coding Format
CCK
Data Link Protocol
IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac
Frequency Band
2.4 GHz, 5 GHz
Status Indicators
Status
Features
Auto-sensing per device, power over Ethernet (PoE), DFS support, Wi-Fi Multimedia (WMM) support, CleanAir technology, Maximum Ratio Combining (MRC), ClientLink 2.0 technology, 3T4R MIMO technology
Encryption Algorithm
AES, TLS, PEAP, TTLS, TKIP, WPA, WPA2
Authentication Method
MS-CHAP v.2, Extensible Authentication Protocol (EAP), EAP-FAST
Compliant Standards
IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, Wi-Fi CERTIFIED, IEEE 802.11h, IEEE 802.11n, IEEE 802.11ac

General

Device Type
Radio access point
Width
22.1 cm
Depth
22.1 cm
Height
5.1 cm
Weight
1 kg

Expansion / Connectivity

Interfaces
2 x 1000Base-T - RJ-45 ¦ 1 x management - RJ-45

Manufacturer Warranty

Service & Support
Limited lifetime warranty
Service & Support Details
Limited warranty - advance parts replacement - lifetime - response time: 10 days

Power

Power Over Ethernet (PoE) Supported
PoE
Power Consumption Operational
15 Watt

Processor / Memory / Storage

RAM
512 MB
Flash Memory
64 MB

Aerial

Antenna
Internal
Directivity
Omni-directional
Gain Level
4 dBi

Γράψτε μια κριτική

Cisco Aironet 2702I ( int. antenna) Indoor 802.11ac High Density Access Point (3x4 MIMO) - Ceiling Mount

Cisco Aironet 2702I ( int. antenna) Indoor 802.11ac High Density Access Point (3x4 MIMO) - Ceiling Mount

Cross-AP noise reduction Optimized AP roaming Cisco ClientLink 3.0 technology Cisco CleanAir technology MIMO equalization Cross-AP noise reduction Cross-AP noise reduction, a Cisco innovation enables APs to intelligently collaborate in real time about RF conditions so that users connect with optimized signal quality and performance. Optimized AP roaming Optimized AP roaming ensures that client devices associate with the AP in their coverage range that offers the fastest data rate available. Cisco ClientLink 3.0 technology Cisco ClientLink 3.0 technology improves downlink performance to all mobile devices, including one-, two-, and three-spatial-stream devices on 802.11ac. At the same time, the technology improves battery life on mobile devices. Cisco CleanAir technology Cisco CleanAir technology enhanced with 80 MHz channel support. CleanAir delivers proactive, high-speed spectrum intelligence across 20-, 40-, and 80-MHz-wide channels to combat performance problems due to wireless interference. MIMO equalization MIMO equalization capabilities, which optimize uplink performance and reliability by reducing the impact of signal fade. Cisco Aironet 2702i Controller-based - Radio access point - 802.11a/b/g/n/ac - Dual Band

ΚΑΤΑΣΚΕΥΑΣΤΕΣ